BHQJY - STABOND P/N 0835-NATURAL

  • MSDS: BHQJY
  • Manufacturer: STABOND CORP
  • Product Name: STABOND P/N 0835-NATURAL
  • National Stock Number: 8040-00-440-5603
Product Identification

Product ID:STABOND P/N 0835-NATURAL
MSDS Date:04/26/1990
FSC:8040
NIIN:00-440-5603
MSDS Number: BHQJY

Responsible Party
STABOND CORPORATION
14010 S. WESTERN AVE.
GARDENA, CA 90249
US

Emergency Phone: 213-770-0591

Info Phone: 714-864-2310

Preparer: C.A. EISEHNARD

Cage: GO049

Contractor
STABOND CORPORATION
GARDENA, CA 90249-3008 US

Telephone: (213) 770-0591

Cage: GO049

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10 - 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 45 - 55%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 25%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LOSS OF FEELING IN EXTREMITIES AND
MORE SEVERE NERVE DAMAGE.
Effects of Overexposure:MILD EYE IRRITATION. MILD SKIN IRRITATION.
INHALATION CAN CAUSE DIZZINESS, HEADACHE, EXCITATION, DEPRESS
NERVOUS SYSTEM. SWALLOWING MAY IRRITATE INTESTINES AND ASPIRE TO
LUNGS.

First Aid

First Aid:INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING IF REQUIRED.
KEEP WARM. GET MEDICAL ATTENTION. EYE CONTACT:WASH WITH LARGE
AMOUNTS OF WATER. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
INGESTION:DRI NK SEVERAL OUNCES OF EDIBLE OIL, MILK OR WATER TO
DILUTE. DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION. SKIN
CONTACT:WASH WITH SOAP AND WATER. IF IRRITATION PERSISTS,GET
MEDICAL ATTENTION.

Fire Fighting

Flash Point:-22F/30C
Lower Limits:1.2
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE SCBA AND PROTECTIVE EQUIPMENT.USE
WATERSPRAY TO COOL FIRES EXPOS STRUCT & TANKS & TO DISPERSE VAP
CLOUD. IF FIRE IS NOT PRESENT.
Unusual Fire/Explosion Hazard:VOLATILE SOLVENT CONSTITUENT CAN READILY
FORM EXPLOSIVE OR FLAMMABLE MIXTURES IN AIR. VAPORS CAN FLOW ALONG
SURFACES TO DISTANT IGNITION SOURCES AND FLASHBACK.

Accidental Release

Spill Release Procedures:HANDLE AS A FLAMMABLE LIQUID. REMOVE ALL
IGNITION SOURCES. SOAK UP WET MATERIAL IN A NON-COMBUSTIBLE
ABSORBENT AND PLACE IN A CLOSED METAL CONTAINER.

Handling

Handling and Storage Precautions:STORE IN COOL,WELL VENTED AREAS FROM
IGNITION SOURCES & STRONG OXIDIZING AGENTS.KEEP CONTAINERS TIGHTLY
CLOSED WHEN NOT IN USE.DO NOT TRANSFER TO PLAS
Other Precautions:GROUND/BOND METAL CONTAINERS WHEN DISPERSING.NO
SMOKING IN AREAS OF USE/STORAGE.USE ONLY NON-SPARKING TOOLS NEAR
WET ADHESIVE OR SOLVENT VAPORS.SOLVENT VAPOR MUCH HEAVIER THAN AIR
& CAN COLLECT IN DAN GEROUS CONCENTRATIONS ON FLOOR DRAINS.

Exposure Controls

Respiratory Protection:MATERIAL NOT SUITED FOR SPRAY IN RESTRICTED OR
NON-VENTILATED AREAS WHERE VAPOR EXPOSURE MAY BE ENCOUNTERED, USE
NIOSH APPROVED RESPIRATOR WITH ORGANIC SOLVENT VAPOR ABSORBING
FILTER OR INDEPENDENT AI R SUPPLY.
Ventilation:MECHANICAL AND/OR LOCAL EXHAUST,SUFFICIENT IN PATTERN AND
VOLUME TO MEET TLV REQUIREMENTS/PREVENT EXPLO CONC OF VAPORS.
Protective Gloves:USE POLYETHLENE OR NITRILE GLOVES.
Eye Protection:SAFETY GLASSES W/SPLASH GUARD/SIDESHIELD
Other Protective Equipment:EYE WASH FOUNTAIN OR BOTTLES. SOLVENT
INSOLUBLE BARRIER HAND CREAM.
Work Hygienic Practices:DO NOT USE CONTACT LENSES. WASH CONTAMINATED
CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:156 TO 221F
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:89.53

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZATION AGENTS CAN CAUSE SPONTANEOUS COMBUSTION.
Stability Condition to Avoid:KEEP AWAY FROM ALL SOURCES OF IGNITION AND
HEAT.
Hazardous Decomposition Products:BURNING MAY PRODUCE CO2, CO, HCL

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS FOR THE FLAMMABLE MIXTURE. SOLID INGREDIENTS
ARE NOT CONSIDERED HAZARDOUS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.